Precision & Measuring Tool Repair Pricing

Prices are a guideline only. Extra parts may be necessary.
Firm quotes available after inspection.
Prices do not include replacing digital displays or modules.
If any tools are beyond repair or economical cost,
Brady Industrial Supply will notify you and quote a new tool for price comparison.

BORE GAGES (Two & Three Point) Alina $90-$125.00 Federal-Standard-Diatest $90-$135.00 Sunnen-Interapid-Compac-Fowler-MTI $125-$190.00	DIAL INDICATORS ( up to 1.000" Travel) CDI-Federal-Mitutoyo $35-$45.00 Fowler-Starrett-Standard $40-$55.00
DEPTH GAGES Mitutoyo-Starrett $40-$90.00	DIGITAL INDICATORS CDI-Mitutoyo-Starrett $50-$90.00
TEST INDICATORS (Prices include new point if needed) Interapid-Tesa-Brown & Sharpe $45-$60.00 Alina-Compac-Lufkin $45-$65.00	MICROMETERS (All Makes) 0-2" $25-$35.00 2-4" $35-$50.00 4-6" $40-$60.00 6"-Up $40-$60.00
MECHANICAL DIGIT MICROMETERS (All Makes) 0-2" $38-$48.00 2-4" $42-$60.00	DIGIT MICROMETERS 0-2" $40-$60.00 2-4" $45-$75.00
DISC - POINT-BLADE MICROMETERS MUST QUOTE	CHAMFER CHECK $35-$75.00
DIAL AND VERNIER CALIPERS 4-8" $30-$45.00 12-24" $45-$100.00 36-60" $100-$220.00	DIGITAL CALIPERS 4-8" $40-$60.00 12-24" $55-$100.00 36-60" $100-$220.00
DIAL AND VERNIER HEIGHT GAGES 10-12" $40-$150.00 18" $140-$200.00 24" $160-$220.00 "$200-$340.00	DIAL AND CLIQUE TORQUE WRENCHES CDI-Craftsman-S/R $40-$70.00 Snap on - Proto $42-$80.00
DIAL AND CLIQUE TORQUE WRENCHES CDI-Craftsman-S/R $40-$70.00 Snap on - Proto $42-$80.00	DIAL TORQUE ANALIZER CDI $50-$100.00

ALL TOOLS CLEANED ULTRASONICALLY
ANVILS LAPPED PARALLEL
ALL RODS POLISHED AND ALL REPAIRS COMPLETED
TO MANUFACTURERS SPECIFICATIONS AND IN CERTIFIABLE CONDITION

Precision & Measuring Tool Certification Pricing

1-2-3 BLOCKS & 2-4-6 BLOCKS Single $25.00 ea Matched Pair $40.00 ea	ANGLE PRECISION BLOCKS (+/- 30 Seconds only) ¼ deg- 30 deg. $12.00 ea 30-45 deg. Set $25.00 ea
BORE GAGES including the inspection of additional contact point 3 point model $40.00 per head 2 point model (dial indicator) $50.00 ea	CALIPERS-Dial, Digital, Vernier 4-9" $25.00 ea 12 - 60" $2.50 per inch
CALIPERS-Inside Diameter $40.00 ea	DEPTH MASTER Mitutoyo, Size Control & Glastonbury $12.00 per step
DEPTH GAGES-Dial, Digital & Vernier 0-1" $25.00 ea additional depth rods $5.00 ea	CHAMFER CHECK GAGES (4 point linear check) 0-2" $50.00 ea
FEELER GAGE .001-.100" $3.00 per leaf	GAGE BLOCKS GRADE 2, 3 or Workshop (+/- .000050) Minimum $35.00 per set English sets 0.050-4.000" $2.50 per block English thin sets .005-.050", .020 .050 series $3.00 per block Metric sets 0-.50-100.00mm $2.50 per block Grade 1 English or Metric 30% premium English long sets 5.000-20.000" $3.00 per inch Metric long set 125mm-500mm $3.00 per inch Variance of Length $1.50 per block
FORCE GAGES (Tension & Compression) 0-200 pounds $100.00 ea
HEIGHT GAGES (scriber & clamp must be sent with gage) 0-40.000" $3.00 per inch 0-1000mm $3.00 per 25mm High Accuracy Height Gages (.0001-.00005") $5.00 per inch	HEIGHT MASTERS -Top reading only 0-24.000" $12 00 per reading 0-450mm $12.00 per reading
INDICATORS-Dial or Digital .00005-1.000" $25.00 ea 2.000-4.000" $40.00 ea Mahr .000020" & .000050" $50.00 ea Microkator .000010", .000020" & .000050" $60.00 ea	TEST INDICATORS (includes +/- readings) Tol. +/- .0005-.060", +/- .0001-.016", +/- .00005-.008" $30.00 ea
INSIDE MICROMETERS (includes polishing of all rods) Dial (Starrett type) $45.00 ea Vernier $25.00 ea Additional length rods $5.00 ea Special 0-1" (Mitutoyo type) $25.00 ea	LENGTH STANDARDS 1.000-4.000" or 25mm-100mm flat ends $5.00 ea 5.000-40.000" or 125mm-450mm-flat ends $1.00/inch/25mm 1.000-4.000" or 25mm-100mm-radius ends $6.00 ea 5.000-40.000" or 125mm-450mm radius ends $1.50/inch/25mm Note: All Starrett have radius ends
KALMASTERS ID & OD measurment $12.00 per reading	LEVELS 5.000", 10.000" & 12.000" $75.00 ea
MICROMETERS-Digital, Digit & Vernier 0-3.000" $25.00 ea 4.000-8.000" $30.00 ea 9.000-36.000" $40.00 ea	MICROMETERS-Special Type Thread micrometers with 1 anvil set $35.00 ea Additional anvil sets $10.00 ea set Vee micrometers 0-3.000" $50.00 ea Point Micrometers 15 deg. & 30 deg. $35.00 Spherical Anvil Micrometers $35.00 ea Disc Micrometers $35.00 ea
MIKEMASTERS (Size, Control & Glastonbury .500-18.000" $15.00 per reading .100-3.000" $7.50 per reading	MASTER REFERENCE GAGES (Brown & Sharpe & Trimos) 1.000" ID reading $50.00 ea
PARALLELS $50.00 ea pair	PIN GAGES (Tolerances of +/- .0002") Center, reading only $1.00 per pin Left, Center & Right readings $1.75 per pin Replacement Pins Available QUOTE Go/NoGo pin gage sets $15.00 per set
PLUG GAGES-PLAIN Deltronic $ 5.00 ea .008-1.000" $15.00 ea 1.0001-6.0000" $30.00 ea	PITCH GAGES $2.50 per leaf
PROTRACTORS Dial type $40.00 ea Digital type $60.00 ea Vernier type* $35.00 ea *additional blades for Vernier $15.00 ea	RADIUS GAGES Short Form ( 1 radius) $2.50 ea
RING GAGES (long form only) .1250-2.0000" $20.00 ea 2.0001-4.0000" $25.00 ea 4.0001-10.000" $30.00 ea

Prices subject to change without notification.
Products out of acceptable tolerance may require repair quote.
Prices for standard non-modified products.

RULERS-STEEL 6.000" Pocket & 12.000" $25.00 ea 18.000" & 24.000" $30.00 ea 36.000" & 72.000" $1.00 per inch	STEEL TAPE MEASURES (up to 72") QUOTE
SCALES-WEIGHT Double & Triple Beam $75.00 ea Digital (.001gm or larger models only) $90.00 ea	SPHERES CMM (grades 10 & 25, .750-1.000") $45.00 ea CMM (grades 10 &25, 2.000") $60.00 ea Ball Sets (52pc) $100.00 per set
SINE BAR $75.00 ea SINE PLATE $100.00 ea	SURFACE PLATES-Granite 6x6, 6x8 indicator stands $25.00 ea 12x18 $25.00 ea 18x24 $45.00 ea
TAPER GAGES & THICKNESS GAGES .100-1.000 & 1mm-25mm $35.00 ea	TORQUE WRENCHES 0-250 Foot Pounds $75.00 ea Pre-Set $45.00 ea TORQUE TRANSDUCERS (Dial & Digital) 0-250 foot pounds $100.00 ea
VEE-BLOCKS 2",3"4" (squareness & parallelism in vee) $50.00 ea Matched pair (squareness & relative parallelism) $75.00 ea pair	THREAD PLUG GAGES ( all ranges) $20.00 ea end
MEASURING WIRES (all ranges) $12.00 ea	THREAD RING (all ranges) $20.00 ea SET PLUG GAGES (all ranges) $20.00 ea end
PIPE THREAD PLUG GAGES (all ranges) $30.00 ea	PIPE THREAD RING GAGES (all ranges) $35.00 ea

PHONE: 248.615.0022
FAX: 248.615.0088
Or Email Us at
mail@bradyindustrial.com

Regular Mail:
Brady Industrial Supply
41100 Bridge St
Novi, MI 48375

Acquire the right solution. Receive on-time performance. Place orders by phone.
Payment may be made with AMERICAN EXPRESS, VISA or MASTERCARD.
You may also submit your credit application for open account.
Terms to approved accounts are NET 30 DAYS.

Brady Industrial Supply and Precision Tool Repair accepts American Express, Visa and Master Card

A Family of Fine Companies
eRathsburg - Signal Conditioning Solutions - Park America - Barcode Basics - RFIDelivery
Center for Artificial Vision

Industrial Supply - Distributor of Precision & Measuring Tools. In House Precision Tool Repair. Providing complete Precision Tool Sales and Services.

Privacy Statement - Terms of Use